Toddy Commercial Cold Brew System + Lifter
Brand
Toddy
The Toddy Commercial Cold Brew System with Lifter is perfect for cold brewing coffee or tea for commercial locations such as cafes, restaurants and retail stores.
Available for Shipping Australia Wide!
The Toddy Commercial Cold Brew System Now Comes with The Toddy Lifter
The Toddy Commercial Cold Brew System with Lifter uses an engineered and patented cold water brewing process to produce outstanding cold brew coffee and tea.
The end product is smooth, full-bodied and aromatic. Many leading coffee shops are using this method because of the superior results, for example in coffee the end result develops a much lower acidity - approximately 67% less acid than traditionally brewed coffees. Perfect served over ice, or as an iced latte, or frozen drink.
Also included in this bundle is the new Toddy Lift. The Lift makes it even easier to brew a batch of coffee in your Toddy system. With no squeezing required, the Lift increases the volume of cold brew you get out of every batch. Simply place the Lift feet down at the bottom of the brew bucket, and add your filter bag, coffee, and water.
Toddy Commercial Cold Brew System Includes:
- Toddy Commercial Brew bucket
- Lid
- Spigot (Tap)
- Toddy Lift
Please note: The new commercial configuration above does not include paper filters which are required to brew.
Toddy Commercial Cold Brewing Instructions:
1. Insert the Lift into your Toddy Commercial Brew System feet down, making sure not to obstruct the spigot.
2. Using the Lift as a shelf, insert a filter bag, and add your favourite ground coffee and water to brew.
3. When you have finished brewing, decant the concentrate through the spigot into airtight containers.
4. Close the spigot and let the grounds sit for another 15-30 minutes. Coffee concentrate will continue to flow from the elevated grounds sitting on top of the Lift, into the bottom of the brewing container.
5. Decant the rest of the concentrate and clean your Toddy as per usual.
