Rhinowares Pitcher Rinser with Spinjet (300mm)

The Rhinowares Pitcher Rinser with Spinjet (300ml) has been Designed to Fit Multiple Milk Pitchers, Making it Perfect for All Busy Hospitality Environments!

This Rhinowares Pitcher Rinser with Spinjet (300ml) includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. It also features a new honeycomb design drain tray and a new Actuator Star design, both of which help to prevent liquid build-up. 

Rhinowares Pitcher Rinser with Spinjet (300ml) Features:

EFFECTIVE MECHANICAL CLEANING- The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for plungers using tea leaves, stubborn coffee grounds, and milk and other residues that can often be difficult to clean.

SUPERIOR DRAINAGE - The honeycomb grate design minimises the surface area of the drain tray, reducing the static build-up of liquids and making cleaning easy. The low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused by static waste. A large drain outlet and a wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.

LARGER VESSEL OPTIONS - The Actuator Star diameter allows both small and larger vessels to be cleaned easily. 

NSF Certified - All Rhino Milk Pitcher Rinsers are NSF Certified.

Rhinowares Pitcher Rinser with Spinjet (300ml) Specifications:

- Dimensions (approx): 238mm (W) x 300mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of the bench.)

- Materials: Stainless Steel

- Drain Hose: 25mm/1" size

- Flow Rate: 120 lph approx.

Depth Requirements: 

The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

Installation Notes:

- Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into benchtop surfaces. Crema does not take responsibility for installation cut out error and provides the sizes and dimensions as a layout guide only.

- It is recommended that a Pressure Limiting Valve (PLV - also known as a Pressure Restricting Valve or Water Pressure Regulator) is used when installing on mains water line.